|
Sealite have a range of marine lanterns that may be used to
comply with bridge lighting requirements.
The 107mm Sealite LED lens is available in both positive and
negative divergence to cater for elevated mounting positions.
Bridge lights are typically fixed-on, however a choice of over 256
IALA recommended flash patterns are available as standard.
The lights are available as configured to operate from 12v, 110v,
or 240v power, or supplied as complete solar/battery systems to comply with requirements of
regional governing bodies such as the U.S. Coast Guard, or the IALA Recommendations for the marking
of fixed bridges over navigable waters.
In U.S. waters for instance, the Coast Guard prescribes certain
combinations of fixed lights for bridges and structures extending over waterways. In general, red
lights are used to mark piers and supports, and green lights mark the centerline of the navigable
channel through a fixed bridge.
If there is more than one channel through the bridge, the preferred
route is marked by three white lights placed vertically. Red lights are also used on some lift
bridges to indicate the lift is closed, and green lights to indicate that the lift is open to
vessel traffic.
Double-opening swing bridges are lighted with three lanterns on top
of the span structure so that when viewed from an approaching vessel the swing span when closed
will display three red lights, and when open for navigation will display two green
lights.
Typical night marking of bridge structures generally
includes;
- Red or green flashing lights to mark the navigable limits of
the channel in accordance with the IALA Maritime Buoyage System located on the bridge piers,
under the span, or on buoy and beacons in the water
- A ‘best point of passage’ indicated by a white light(s)
located under the span and exhibiting a safe water mark character
Contact your local authority for a full description of
bridge marking requirements for your region.
For a copy of the IALA Recommendations for the marking
of fixed bridges over navigable waters please contact Sealite.
|